What specifically were you trying to accomplish? Maybe we can come up with a different way for you that gets a similar end result. So the harmony hub itself is not a Z wave controller, and even if it were, it would not work well with smartthings on the same Z wave network. We cannot offer support for disconnected Z-Wave devices or the inability to add devices through the Hub as a result of including the Hub into another Z-Wave network. SmartThings strongly discourages adding the Hub to another Z-Wave network. If you still have questions browse the topics on the left. In fact, the company goes so far as to specifically advise against ever adding it as a secondary: We've put everything you need to get started with your Logitech Harmony Link right here. It has a matte white finish, measures 7.25 by 1.25 by 7.25 inches (HWD), and stands upright. It also provides no mapping tools at all. The Wink Hub 2s slender, tapered design is decidedly more appealing than the originals. SmartThings is certified at the basic level, but does not include a number of advanced control and management command sets, such as controller shift and controller replicate. In fact, you can’t even add a second SmartThings hub to the same “location,” obviously a very different architecture than Vera, where adding a second Vera hub is the recommended solution for a number of use cases. Please ensure your Lutron Bridge is connected to the internet. Second, the one that has been answered a number of times before: while the official zwave standard definitely allows for one primary controller and multiple secondary controllers on the same Z wave network, SmartThings was designed from the beginning as a multiprotocol cloud-based platform, and it just does not play well with others in either the primary or the secondary role. Lutron - Caseta Wireless Smart Lighting Dimmer Switch Starter Kit - White. Harmony connects with your Lutron Bridge using an active internet connection. Unless you were reading about the harmony hub extender, which is a Z wave device, but that’s a whole different set up. So I’m not sure what you were reading about it, but if you can give us a link, we can try to figure out what it was actually describing. YMMV, if you're technical look at Smartthings and/or homeseer (I have no experience with it, yet) if you're just wanting good voice controls and a phone app, don't want to spend time customizing to your own specifications, or have no programming background I would recommend the Wink.First, the easy one: the harmony home hub does not have a Z wave radio. I'm personally bought into Smartthings for that purpose, it also lacks the latency because when you're connected to the same network and you trigger an action (turn on these lights) it can execute that locally, so there's no 500 ms delay. it's dark out, if motion is detected here then turn on these lights) AI-generated from the text of customer reviews.I can now control my lights and door. The interface is clean, a variety of events can be used, it supports "modes" of your house, and it supports pretty good conditions on events (e.g. Wink hub and that the remote would stop controlling the Z-wave unit. Smartthings works on an open source philosophy so you can integrate things into it via plugins that the community (or yourself) writes. I've enabled a community extension for the Nest Thermostats and have a few other toys enabled that didn't integrate with Wink (my Up3 detects when I fall asleep, which triggers locking all doors if I'm home and turning off my bedside lamp). Smartthings integrates well with Harmony, Phillips Hue, MyQ, and the Connect Locks, it lacks some functionality that drives me a little insane, but not enough for me to spend time to write said functionality. I also couldn't get into their interface, and everything with them is proprietary. Wink does everything through their servers, so the latency with lights and the such is really noticeable. Wink's hub integrated well with these devices, I had better control over things like pin numbers for the Schlage Connects, could trigger events from the camera, integrate Nest directly. Wink hub Honeywell thermostats Hogar Milo (with Google Assistant for voice controls) ADT Security Hub August smart locks Yale smart locks Logitech. To preface I also have several other home control devices, which include 2 Harmony Hubs, a doorbell, 3 Nest Cameras, 2 Nest Thermostats, 4 Nest Protects, a Phillips Hue Hub, 2 MyQ Garage Door Openers, and 2 Schlage Connect Deadbolts. I've had both SmartThings and Wink, they both work perfectly fine with Alexa, but there are some minor differences as far as I'm concerned.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |